Understanding material defects at the atomic scale using anitmatter.

Ultralight boson particles have been predicted to solve problems in particle and high-energy physics and are compelling dark matter candidates. We develop algorithms and search for these conjectured ultralight bosons around black holes via gravitational-wave observations. 

Following a practical introduction to optical interferometry for gravitational wave detectors and simulation tools, this project will model the optical configuration to optimize detector performance against a number of possible predictions of the neutron star equation of state.

Investigate the properties of exotic nuclei and their impact on fundamental models and creation of the elements when stars explode. 

For gravitational-wave detections and analyses, the raw outputs from the gravitational-wave detectors need to be converted into analysable data through some calibration apparatus. This project investigates new techniques to improve calibration accuracy and precision and better integrate the calibration bias into astrophysical analyses. 

When two neutron stars collide, what is left behind? We develop methods and look for gravitational-wave signatures from the newborn remnant object after the collisions of binary neutron star systems.

Radionuclides can serve as tracers and chronometers for environmental processes. The time scale for these clocks is set by the half-life of the respective radioisotope. Using accelerator mass spectrometry and decay counting this project aims investigate the chronology of the Early Solar System.

This experiment will characterise dark matter detector material. Lowest levels of natural radioactivity in high purity samples will be analysed via ultra-senstive single atom counting using acclerator mass spectrometry.

In this project, we develop data analysis methods and analyse the gravitational-wave data collected by ground-based detectors like Advanced LIGO and Virgo to look for weak gravitational radiation from spinning neutron stars.

The event of two merging neutron stars, GW170817, was observed in gravitational waves and across the electromagnetic spectrum, opening a new era of multi-messenger astronomy. We work on following up electromagnetic counterparts to future detections of gravitational waves and are ready to contribute to the new science of multi-messenger astronomy. 

Understanding material defects at the atomic scale using anitmatter.

This experimental project aims to create entangled states of ultracold helium atoms where the entanglement is between atoms of different mass. By manipulating the entangled pairs using laser induced Bragg transitions and measuring the resulting correlations, we will study how gravity affects mass-entangled particles.

Motivated by exciting prospects for measurements of the magnetism of rare isotopes produced by the new radioactive beam accelerators internationally, this experimental and computational project seeks to understand the enormous magnetic fields produced at the nucleus of highly charged ions by their atomic electron configuration.

Atomic sensors are exquisitely sensitive. We aim to model and build a new generation of atomic sensors to measure magnetic fields, rotation and dark matter. 

Using the atomic and molecular physics positron beam at the ANU, the student will undertake measurements of positron scattering from simple targets, providing high accuracy data to test recent theoretical calculations.

This is a multi-faceted project which can be adapted to students at the honours level and above. A number of possibilities exist to perform experiments directed towards improving the use of positrons in medice, mostly focussed on Positron Emission Tomography (PET).

Antiparticles and antimatter have progressed from theory and science fiction to become an important and exciting area of pure and applied science. This fundamental atomic physics project will investigate how antimatter and matter interact by experimentally studying the interaction of positrons (the electron anti-particle) with trapped ultracold rubidium atoms.

An optical quantum memory will capture a pulse of light, store it and then controllably release it. This has to be done without ever knowing what you have stored, because a measurement will collapse the quantum state. We are exploring a "photon echo" process to achieve this goal.

We are investigating novel effects and applications using positrons and structured surfaces.

Development of efficient, versatile and fast laser femtosecond processes for advanced applications in modern dentistry promising a precise pain-free dental treatment for all patients.

Understanding material defects at the atomic scale using anitmatter.

Investigate novel nanopore bio-sensors using nanofabrication, bio-chemsity and machine learning.

This is a multi-faceted project which can be adapted to students at the honours level and above. A number of possibilities exist to perform experiments directed towards improving the use of positrons in medice, mostly focussed on Positron Emission Tomography (PET).

We are seeking students to perform fundamental research into how different ions exert influence in a myriad of systems.

Proton-boron fusion has the potential to deliver limitless clean energy. This project will aims to understand the physics underpinng this important nuclear reaction.

Explore directional detection for underground dark matter searches.

Understanding material defects at the atomic scale using anitmatter.

The measurement of the lifetimes of excited nuclear states is foundational for understanding nuclear excitations. This project covers three measurement methods that together span the nuclear lifetime range from about 100 femtoseconds to many nanoseconds. The project can include equipment development, measurement, and the development of analysis methodology (programming and computation). 

This project will use nuclear reactions to study the basic make-up of atomic nuclei at the quantum level, and investigate the impact of nuclear structure on sub-atomic forces and fundamental physics. 

Following a practical introduction to optical interferometry for gravitational wave detectors and simulation tools, this project will model the optical configuration to optimize detector performance against a number of possible predictions of the neutron star equation of state.

Use ultra-fast gamma-ray detectors to perform excited-state lifetime measurements and investigate single-particle and collective features of atomic nuclei. 

Recent advances in laser technology now enable the combination of multiple high-quality lasers into a single high-power beam. This project aims to investigate such 'coherently-combined' laser systems within the context of Earth-to-Space laser transmission. Applications of this technology include space debris tracking, free-space optical communications, and propulsion of light-sails for interstellar travel, such as Breakthrough Starshot.

The field of mechanical metamaterials is a fast-developing research domain, here the project aims at studying and developping wood-based and wood-inspired metamaterials.

For gravitational-wave detections and analyses, the raw outputs from the gravitational-wave detectors need to be converted into analysable data through some calibration apparatus. This project investigates new techniques to improve calibration accuracy and precision and better integrate the calibration bias into astrophysical analyses. 

Develop an active vibraiton isolation platform to provide a quiet, small displacement environment for high precision inteferometry.

This project aims to gain fundamental insights into the mechanisms of energy dissipation in nuclear collisions by making new measurements that will aid in the development of new models of nuclear fusion.

Inter-satellite laser links are an emerging technology with applications in Earth Observation, telecommunications, security, and, the focus of the CGA space technology group.

High precision optical measurement requires the development and deployment of highly stable laser sources. The first step towards stabilising a laser is tracking and measuring it's phase noise. This project aims to develop new signal processing and optical methods to track and stabilise cheap noisy lasers for precision measurement.

Absolute gravimeters tie their measurement of gravity to the definition of the second 
by interrogating the position of a falling test mass using a laser interferometer. Our vision is to develop and prototype a miniaturised absolute gravimeter by 
leveraging modern vacuum, laser, and micro-electromechanical systems.

Nanobubbles are simply nanosized bubbles. What makes them interesting? Theory tells us they should dissolve in less than a second but they are in some cases stable for days.

The goal of this research is to study high pressure non-equilibrium plasma discharges in chemically reactive systems with applications to space, waste treatment and material science.

We measure the basic forces that operate between molecules that are manifest at interfaces. These forces control the stability of colloidal systems from blood to toothpaste. We use very sensitive techniques that are able to measure tiny forces with sub nanometer distance resolution. Understanding these forces enables us to predict how a huge variety of colloidal systems will behave.

Proton-boron fusion has the potential to deliver limitless clean energy. This project will aims to understand the physics underpinng this important nuclear reaction.

Fusion energy promises millions of years of clean energy, but puts extreme stress on materials. This research will resolve scientific issues surrounding plasma-material interactions to guide and facilitate development of future advanced materials for fusion reactors.

This project involves studying the complex plasma-surface interaction region of a fusion-relevant plasma environment through laser-based and spectroscopic techniques.

Gravitational wave detectors have reached the thermodynamic limit of optical coatings. Further sensitivity improvements require new coating materials and noise mitigation techniques. This project models the behaviour of higher order spatial laser modes in optical resonators for measuring coating thermal noise directly.

Gravitational wave detectors have reached the thermodynamic limit of optical coatings. Further sensitivity improvements require new coating materials and noise mitigation techniques. This project is about designing an experiment to measure the exponential decay of mechanical oscillator modes for determining key properties of optical coatings.

Understanding material defects at the atomic scale using anitmatter.

This project investigates the structure and density of defects created in 2D materials by energetic ion irradiation, and their effect on the the physical properties of these materials.

Contact resistance is becoming a major limitation to device performance and new strategies are required to meet the needs of next-generation devices.  Existing contacts typically exploit the thermal and chemical stability of silicide/Si interfaces and take the form of a metal/silicide/Si heterostructure (e.g. W/TiN/TiSi₂/Si), with the contact resistance dominated by the silicide/Si interface. The contact resistance of this interface is limited by the doping concentration in the Si substrate and the Schottky barrier height (SBH) of the heterojunction.  However, doping concentrations already exceed equilibrium solid solubility limits and further increases achieve only minor improvements.  Instead, any further reduction in contact resistivity relies on reducing the SBH.  This project will explore methods for controlling the SBH and develop device structures for measuring ultra-low contact resistivities.

Nano-pore membranes have important applications in chemical- and bio-sensing, water filtration and protein separation. This project will investigate our innovative technology to fabricate nanopore membranes in silicon dioxide and silicon nitride and exploit their use for advanced applications.

Gravitational wave detectors have reached the thermodynamic limit of optical coating performance and require novel coating materials and coating noise suppression techniques for further sensitivity improvements. This project is to design a high-bandwidth feedback control system to stabilise the intensity and frequency of a 2µm-band laser for investigations of thermal noise in experimental mirror coatings.

We have shown that glassy carbon is a fascinating material which has different properties depending on thow it was formed. The effect on how order and impurities influences the new phases formed under pressure is not understood.

Interest in neuromorphic computing has led to interest in an excting new range of of solid-state neurons and synapses based on non-volatile resistive-switching and volatile threshold-switching in metal-oxide thin films.  This project explores the operation and functionality of these new devices with an emphasis on understanding the underlying mechanisms and materials physics.

This project explores the nonlinear optical properties of ultrathin 2D crystals to develop highly entangled photon sources.

We are studying colloidal systems in highly concentrated salt solutions. Here a number of surprising and unexplained things happen that are associated with surprisingly long-ranged electrostatic forces

This experimental project will focus on nvestigation of strong light-matter coupling and exciton polaritons in novel atomically thin materials.

Laser Cleaning is a cutting-edge technique designed for removal of contamination layers from solid surfaces by irradiating the surface with a laser beam. It is a non-contact process, which does not require the use of chemicals or abrasives, eliminating problems of chemical toxicity, corrosive residues, and erasure of surface structure. 

Superconducting and spin qubits are leading quantum computing technologies, but we currently have no way to connect them to optical quantum networks that will make up a future quantum internet. This project will develop an interconnect capable of efficiently converting microwave quantum information from these qubits to optical frequencies.

New forms of materials can be made using extreme pressures via diamond anvil cells.

The hexagonal form of sp3 bonded carbon is predicted to be harder than 'normal' cubic diamond. We can make tiny amounts of this new form of diamond and want to know if it really is harder than diamond.

Fusion energy promises millions of years of clean energy, but puts extreme stress on materials. This research will resolve scientific issues surrounding plasma-material interactions to guide and facilitate development of future advanced materials for fusion reactors.

This project aims to investigate the growth of III-V semiconductors on pre-patterned nanotemplates. By using different shapes and geometries, it is envisaged that these nanostructures will provide novel architectures for advanced, next generation optoelectronic devices.

This is a multidisciplinary project supported by the ANU Grand Challenge project ‘Our Health in Our Hands’ (OHIOH), aimed at developing wearable sensors for detecting target biomarkers to identify certain health conditions.

Semiconductor nanowires are emerging nano-materials with substantial opportunities for novel photonic and quantum device applications. This project aims at developing a new generation of high performance NW based photodetectors for a wide range of applications.

Laser processing is a cutting-edge technique designed for to clean, texture, enhance surfaces in a way not possible with any other method. It is a non-contact process, which does not require the use of chemicals or abrasives, thus eliminating problems of chemical toxicity and corrosive residues.

This project involves studying the complex plasma-surface interaction region of a fusion-relevant plasma environment through laser-based and spectroscopic techniques.

We are investigating novel effects and applications using positrons and structured surfaces.

Controlling the flow of ions and molecules through nano-sized pores is fundamental in many biological processes and the basis for applications such as DNA detection, water desalination and drug delivery. The project aims to develop solid-state nanofluidic diodes and exploit their properties for applications in bio-sensors and ion-selective channels.

Understanding material defects at the atomic scale using anitmatter.

The project aims to investigate compound semiconductor micro-ring lasers on silicon substrates using selective area growth to engineer the shape of the lasing cavity at the nano/micro-scale. This project will open up new doors to the industry since an integrated laser which is reliable, efficient and easily manufacturable is still elusive in Si photonics.

This project investigates the structure and density of defects created in 2D materials by energetic ion irradiation, and their effect on the the physical properties of these materials.

Contact resistance is becoming a major limitation to device performance and new strategies are required to meet the needs of next-generation devices.  Existing contacts typically exploit the thermal and chemical stability of silicide/Si interfaces and take the form of a metal/silicide/Si heterostructure (e.g. W/TiN/TiSi₂/Si), with the contact resistance dominated by the silicide/Si interface. The contact resistance of this interface is limited by the doping concentration in the Si substrate and the Schottky barrier height (SBH) of the heterojunction.  However, doping concentrations already exceed equilibrium solid solubility limits and further increases achieve only minor improvements.  Instead, any further reduction in contact resistivity relies on reducing the SBH.  This project will explore methods for controlling the SBH and develop device structures for measuring ultra-low contact resistivities.

Nano-pore membranes have important applications in chemical- and bio-sensing, water filtration and protein separation. This project will investigate our innovative technology to fabricate nanopore membranes in silicon dioxide and silicon nitride and exploit their use for advanced applications.

This project aims to investigate the concepts and strategies required to produce electrically injected semiconductor nanowire lasers by understanding light interaction in nanowires, designing appropriate structures to inject current, engineer the optical profile and developing nano-fabrication technologies. Electrically operated nanowire lasers would enable practical applications in nanophotonics.

Interest in neuromorphic computing has led to interest in an excting new range of of solid-state neurons and synapses based on non-volatile resistive-switching and volatile threshold-switching in metal-oxide thin films.  This project explores the operation and functionality of these new devices with an emphasis on understanding the underlying mechanisms and materials physics.

Investigate novel nanopore bio-sensors using nanofabrication, bio-chemsity and machine learning.

Nanobubbles are simply nanosized bubbles. What makes them interesting? Theory tells us they should dissolve in less than a second but they are in some cases stable for days.

Many phenomena in nature, including multiple chemical and biological processes, are governed by the fundamental property of chirality. An object is called chiral when its mirror image cannot be superimposed with the original object. Many examples of chirality can be found in nature, from seashells to DNA molecules.

 

We are studying colloidal systems in highly concentrated salt solutions. Here a number of surprising and unexplained things happen that are associated with surprisingly long-ranged electrostatic forces

In this project we aim to design and demonstrate  III-V compound semiconductor based quantum well nanowire light emitting devices with wavelength ranging from 1.3 to 1.6 μm for optical communication applications.

Experimental and theoretical work on the development of novel nanostructured materials with unusual optical properties. Special attention to our research is the development of tunable and functional nanostructured metamaterials that interact strongly with light. Such materials underpin novel optical technologies ranging from wearable sensors to night-vision devices.

We measure the basic forces that operate between molecules that are manifest at interfaces. These forces control the stability of colloidal systems from blood to toothpaste. We use very sensitive techniques that are able to measure tiny forces with sub nanometer distance resolution. Understanding these forces enables us to predict how a huge variety of colloidal systems will behave.

We are seeking students to perform fundamental research into how different ions exert influence in a myriad of systems.

This project aims to investigate the growth of III-V semiconductors on pre-patterned nanotemplates. By using different shapes and geometries, it is envisaged that these nanostructures will provide novel architectures for advanced, next generation optoelectronic devices.

This project will address the recently emerged new platform for nanophotonics based on high-index dielectric nanoparticles that opened a whole new realm of all-dielectric Mie-resonant nanophotonics or Mie-tronics. High-index dielectric nanoparticles exhibit strong interaction with light due to the excitation of electric and magnetic dipolar Mie-type resonances.

This is a multidisciplinary project supported by the ANU Grand Challenge project ‘Our Health in Our Hands’ (OHIOH), aimed at developing wearable sensors for detecting target biomarkers to identify certain health conditions.

We are investigating novel effects and applications using positrons and structured surfaces.

This project aims to demonstrate semiconductor nanowire based infrared avalanche photodetectors (APDs) with ultra-high sensitivity towards single photon detection. By employing the advantages of their unique one-dimensional nanoscale geometry, the nanowire APDs can be engineered to different device architectures to achieve performance superior to their conventional counterparts. This will contribute to the development of next generation infrared photodetector technology enabling numerous emerging fields in modern transportation, communication, quantum computation and information processing.

Controlling the flow of ions and molecules through nano-sized pores is fundamental in many biological processes and the basis for applications such as DNA detection, water desalination and drug delivery. The project aims to develop solid-state nanofluidic diodes and exploit their properties for applications in bio-sensors and ion-selective channels.

Gravitational wave detectors have reached the thermodynamic limit of optical coatings. Further sensitivity improvements require new coating materials and noise mitigation techniques. This project models the behaviour of higher order spatial laser modes in optical resonators for measuring coating thermal noise directly.

The goal of the project is to understand new physical phenomena arising from quantum and nonlinear optical integration. In the future this research may open doors to new types of computers and simulators with information capacity exceeding the number of elementary particles in the entire universe.

Gravitational wave detectors have reached the thermodynamic limit of optical coatings. Further sensitivity improvements require new coating materials and noise mitigation techniques. This project is about designing an experiment to measure the exponential decay of mechanical oscillator modes for determining key properties of optical coatings.

Development of efficient, versatile and fast laser femtosecond processes for advanced applications in modern dentistry promising a precise pain-free dental treatment for all patients.

The project aims to investigate compound semiconductor micro-ring lasers on silicon substrates using selective area growth to engineer the shape of the lasing cavity at the nano/micro-scale. This project will open up new doors to the industry since an integrated laser which is reliable, efficient and easily manufacturable is still elusive in Si photonics.

Gravitational wave detectors have reached the thermodynamic limit of optical coating performance and require novel coating materials and coating noise suppression techniques for further sensitivity improvements. This project is to design a high-bandwidth feedback control system to stabilise the intensity and frequency of a 2µm-band laser for investigations of thermal noise in experimental mirror coatings.

This project aims to investigate the concepts and strategies required to produce electrically injected semiconductor nanowire lasers by understanding light interaction in nanowires, designing appropriate structures to inject current, engineer the optical profile and developing nano-fabrication technologies. Electrically operated nanowire lasers would enable practical applications in nanophotonics.

Antennas are at the heart of modern radio and microwave frequency communications technologies. They are the front-ends in satellites, cell-phones, laptops and other devices that make communication by sending and receiving radio waves. This project aims to design analog of optical nanoantennas for visible light for advanced optical communiction. 

This project goal is to investigate, theoretically and experimentally, photonic systems with synthetic dimensionality exceeding the three spatial dimensions, and reveal new opportunities for applications in optical signal switching and sensing in classical and quantum photonics.

This project combines theoretical and experimental research on exciton polaritons in semiconductor microcavities. We investigate emergent quantum phenomena far from equilibrium and their applications for next-generation optoelectronics devices.

This project explores the nonlinear optical properties of ultrathin 2D crystals to develop highly entangled photon sources.

Many phenomena in nature, including multiple chemical and biological processes, are governed by the fundamental property of chirality. An object is called chiral when its mirror image cannot be superimposed with the original object. Many examples of chirality can be found in nature, from seashells to DNA molecules.

 

Using non-classical light states on laser interferometric gravitational-wave detectors, to further enhance the best length measurement devices in the world.

This experimental project will focus on nvestigation of strong light-matter coupling and exciton polaritons in novel atomically thin materials.

This project aims to realise various useful artificial gauge fields for cavity photons and exciton polaritons. These fields are expected to be non-Hermitian and can be used to combine effects of non-Hermiticity and topology, e.g. topological edge states and non-Hermitian skin effect. Realising these non-Hermitian fields is an important step towards practical applications of exciton-polariton condensates and superfluids.

Laser Cleaning is a cutting-edge technique designed for removal of contamination layers from solid surfaces by irradiating the surface with a laser beam. It is a non-contact process, which does not require the use of chemicals or abrasives, eliminating problems of chemical toxicity, corrosive residues, and erasure of surface structure. 

In this project we aim to design and demonstrate  III-V compound semiconductor based quantum well nanowire light emitting devices with wavelength ranging from 1.3 to 1.6 μm for optical communication applications.

Gravitational wave detectors have reached the thermodynamic limit of optical coating performance and require novel coating materials and noise mitigation techniques for further sensitivity improvements. This project is to implement a phase tracking system for the optical beat between two 2µm-band lasers for coating thermal noise measurements.

Recent advances in laser technology now enable the combination of multiple high-quality lasers into a single high-power beam. This project aims to investigate such 'coherently-combined' laser systems within the context of Earth-to-Space laser transmission. Applications of this technology include space debris tracking, free-space optical communications, and propulsion of light-sails for interstellar travel, such as Breakthrough Starshot.

This project aims to be the first in the world to use radiation pressure force of laser beams to levitate a macroscopic mirror. The coherence of this resonantly amplified scheme creates a unique opto-mechanical environment for precision quantum metrology and tests of new physics theories.

Metasurface can the generation and manipulation of polarization-entangled photon pairs at the nanoscale.

Optical cavities are widely used in physics and precision measurement.  This project will explore the use of modern machine learning methods for the control of suspended optical cavities.  

Experimental and theoretical work on the development of novel nanostructured materials with unusual optical properties. Special attention to our research is the development of tunable and functional nanostructured metamaterials that interact strongly with light. Such materials underpin novel optical technologies ranging from wearable sensors to night-vision devices.

Precise Earth gratitational field measurements with laser-ranging interferometry.

Inter-satellite laser links are an emerging technology with applications in Earth Observation, telecommunications, security, and, the focus of the CGA space technology group.

The project bridges the fundamental physics of topological phases with nonlinear optics. This promising synergy is expected to unlock advanced functionalities for applications in optical sources, frequency combs, isolators and multiplexers, switches and modulators, both for classical and quantum light. 

This project will address the recently emerged new platform for nanophotonics based on high-index dielectric nanoparticles that opened a whole new realm of all-dielectric Mie-resonant nanophotonics or Mie-tronics. High-index dielectric nanoparticles exhibit strong interaction with light due to the excitation of electric and magnetic dipolar Mie-type resonances.

Semiconductor nanowires are emerging nano-materials with substantial opportunities for novel photonic and quantum device applications. This project aims at developing a new generation of high performance NW based photodetectors for a wide range of applications.

Laser processing is a cutting-edge technique designed for to clean, texture, enhance surfaces in a way not possible with any other method. It is a non-contact process, which does not require the use of chemicals or abrasives, thus eliminating problems of chemical toxicity and corrosive residues.

High precision optical measurement requires the development and deployment of highly stable laser sources. The first step towards stabilising a laser is tracking and measuring it's phase noise. This project aims to develop new signal processing and optical methods to track and stabilise cheap noisy lasers for precision measurement.

We are investigating novel effects and applications using positrons and structured surfaces.

This project aims to demonstrate semiconductor nanowire based infrared avalanche photodetectors (APDs) with ultra-high sensitivity towards single photon detection. By employing the advantages of their unique one-dimensional nanoscale geometry, the nanowire APDs can be engineered to different device architectures to achieve performance superior to their conventional counterparts. This will contribute to the development of next generation infrared photodetector technology enabling numerous emerging fields in modern transportation, communication, quantum computation and information processing.

Explore directional detection for underground dark matter searches.

Proton-boron fusion has the potential to deliver limitless clean energy. This project will aims to understand the physics underpinng this important nuclear reaction.

The measurement of the lifetimes of excited nuclear states is foundational for understanding nuclear excitations. This project covers three measurement methods that together span the nuclear lifetime range from about 100 femtoseconds to many nanoseconds. The project can include equipment development, measurement, and the development of analysis methodology (programming and computation). 

This project will use nuclear reactions to study the basic make-up of atomic nuclei at the quantum level, and investigate the impact of nuclear structure on sub-atomic forces and fundamental physics. 

This project aims to discover if the long-held concept of low-energy nuclear vibrations holds true under scrutiny from Coulomb excitation and nucleon-transfer reactions. 

Improved understandings of nuclear fission is key for many areas of science, including heavy element formation in supernova and neutron-star mergers, making safer nuclear reactors, and the formation and properties of long-lived superheavy isotopes. Students involved in this project will further our understanding of fission across the chart of nuclides.

This project builds on our established track record of developing novel methods to measure magnetic moments of picosecond-lived excited states in atomic nuclei, and the theoretical interpretation of those measurements. Students will help establish new methodologies to underpin future international research at the world's leading radioactive beam laboratories.

 

This project will allow us to understand the time-dependence of quantum tunnelling and nuclear fusion.

Motivated by exciting prospects for measurements of the magnetism of rare isotopes produced by the new radioactive beam accelerators internationally, this experimental and computational project seeks to understand the enormous magnetic fields produced at the nucleus of highly charged ions by their atomic electron configuration.

Use ultra-fast gamma-ray detectors to perform excited-state lifetime measurements and investigate single-particle and collective features of atomic nuclei. 

Investigate the properties of exotic nuclei and their impact on fundamental models and creation of the elements when stars explode. 

Nuclear metastable states, known colloquially as isomers, have energy densities millions of times greater than chemical batteries. This project investigates nuclear pathways for reliably extracting this energy from candidate isotopes on demand. 

This project aims to gain fundamental insights into the mechanisms of energy dissipation in nuclear collisions by making new measurements that will aid in the development of new models of nuclear fusion.

Radionuclides can serve as tracers and chronometers for environmental processes. The time scale for these clocks is set by the half-life of the respective radioisotope. Using accelerator mass spectrometry and decay counting this project aims investigate the chronology of the Early Solar System.

This experiment will characterise dark matter detector material. Lowest levels of natural radioactivity in high purity samples will be analysed via ultra-senstive single atom counting using acclerator mass spectrometry.

Some nuclei, like stable ^6,7Li and ⁹Be or radioactive ⁸Li and ⁶He, are weakly-bound, which gives them a cluster structure which can be broken apart with very little input of energy. These nuclei show a huge variety of behaviors which challenge our understanding of nuclear reactions, requiring experimental measurements. 

The goal of this research is to study high pressure non-equilibrium plasma discharges in chemically reactive systems with applications to space, waste treatment and material science.

The goal of the project is to understand new physical phenomena arising from quantum and nonlinear optical integration. In the future this research may open doors to new types of computers and simulators with information capacity exceeding the number of elementary particles in the entire universe.

This experimental project aims to create entangled states of ultracold helium atoms where the entanglement is between atoms of different mass. By manipulating the entangled pairs using laser induced Bragg transitions and measuring the resulting correlations, we will study how gravity affects mass-entangled particles.

This project goal is to investigate, theoretically and experimentally, photonic systems with synthetic dimensionality exceeding the three spatial dimensions, and reveal new opportunities for applications in optical signal switching and sensing in classical and quantum photonics.

This project combines theoretical and experimental research on exciton polaritons in semiconductor microcavities. We investigate emergent quantum phenomena far from equilibrium and their applications for next-generation optoelectronics devices.

Using non-classical light states on laser interferometric gravitational-wave detectors, to further enhance the best length measurement devices in the world.

This project aims to use a machine learning algorithm to perform beam alignment in an optics experiment. It would involve mode-matching two optical beams using motorised mirror mounts. Additional degrees of freedom like lens positions and beam polarisation can be added later.

Atomic sensors are exquisitely sensitive. We aim to model and build a new generation of atomic sensors to measure magnetic fields, rotation and dark matter. 

This project will construct a 3D optical lattice apparatus for ultracold metastable Helium atoms, which will form an experimental quantum-simulator to investigate quantum many-body physics. A range of experiments will be performed such as studying higher order quantum correlations across the superfluid to Mott insulator phase transition.

This project aims to realise various useful artificial gauge fields for cavity photons and exciton polaritons. These fields are expected to be non-Hermitian and can be used to combine effects of non-Hermiticity and topology, e.g. topological edge states and non-Hermitian skin effect. Realising these non-Hermitian fields is an important step towards practical applications of exciton-polariton condensates and superfluids.

Superconducting and spin qubits are leading quantum computing technologies, but we currently have no way to connect them to optical quantum networks that will make up a future quantum internet. This project will develop an interconnect capable of efficiently converting microwave quantum information from these qubits to optical frequencies.

This project aims to be the first in the world to use radiation pressure force of laser beams to levitate a macroscopic mirror. The coherence of this resonantly amplified scheme creates a unique opto-mechanical environment for precision quantum metrology and tests of new physics theories.

Metasurface can the generation and manipulation of polarization-entangled photon pairs at the nanoscale.

When two point sources of light are close together, we just see one blurry patch. This project aims to use coherent measurement techniques in quantum optics to measure the separation between the point sources beyond the Rayleigh's limit.

Develop an active vibraiton isolation platform to provide a quiet, small displacement environment for high precision inteferometry.

Antiparticles and antimatter have progressed from theory and science fiction to become an important and exciting area of pure and applied science. This fundamental atomic physics project will investigate how antimatter and matter interact by experimentally studying the interaction of positrons (the electron anti-particle) with trapped ultracold rubidium atoms.

Precise Earth gratitational field measurements with laser-ranging interferometry.

Construct a small dual tosion pendulum which have their centre of mass co-incide and their rotational axis colinear. Inital diagnostics will be done using shadow sensors.

An optical quantum memory will capture a pulse of light, store it and then controllably release it. This has to be done without ever knowing what you have stored, because a measurement will collapse the quantum state. We are exploring a "photon echo" process to achieve this goal.

Absolute gravimeters tie their measurement of gravity to the definition of the second 
by interrogating the position of a falling test mass using a laser interferometer. Our vision is to develop and prototype a miniaturised absolute gravimeter by 
leveraging modern vacuum, laser, and micro-electromechanical systems.

Multi-parameter state estimation at the fundamental precision limit

Proton-boron fusion has the potential to deliver limitless clean energy. This project will aims to understand the physics underpinng this important nuclear reaction.

Antennas are at the heart of modern radio and microwave frequency communications technologies. They are the front-ends in satellites, cell-phones, laptops and other devices that make communication by sending and receiving radio waves. This project aims to design analog of optical nanoantennas for visible light for advanced optical communiction. 

This project builds on our established track record of developing novel methods to measure magnetic moments of picosecond-lived excited states in atomic nuclei, and the theoretical interpretation of those measurements. Students will help establish new methodologies to underpin future international research at the world's leading radioactive beam laboratories.

 

This project will allow us to understand the time-dependence of quantum tunnelling and nuclear fusion.

In recent years there was a large boost in development of advanced variational methods which play an important role in analytic and numerical studies of  1D and 2D quantum spin systems. Such methods are based on the ideas coming from the renormalization group theory which states that  physical properties of  spin systems become scale invariant near criticality. One of the most powerful variational algorithms is the corner-transfer matrices (CTM) method which allows to predict properties of large systems based on a simple iterative algorithm.

The aim of this project is to introduce quantum integrable systems which play a very important role in modern theoretical physics. Such systems provide one of very few ways to analyze nonlinear effects in continuous and discrete quantum systems.

There are many interesting physical statistical systems which never reach thermal equilibrium. Examples include surface growth, diffusion processes or traffic flow. In the absence of general theory of such systems a study of particular models plays a very important role. Integrable systems provide examples of such systems where one can analyze time dynamics using analytic methods.

Multi-parameter state estimation at the fundamental precision limit

The field of mechanical metamaterials is a fast-developing research domain, here the project aims at studying and developping wood-based and wood-inspired metamaterials.

The project bridges the fundamental physics of topological phases with nonlinear optics. This promising synergy is expected to unlock advanced functionalities for applications in optical sources, frequency combs, isolators and multiplexers, switches and modulators, both for classical and quantum light.